How Much Does Flooring Cost in Perth? A 2026 Price Guide (Per m²)
New flooring is one of the biggest single upgrades you can make to a Perth home, and the first question is almost always the same: what will it actually cost per square metre? The honest answer is that it depends on the type of floor you choose, but the range is clear. In Perth in 2026, professionally supplied and laid flooring runs from around $47 per square metre for laminate up to $135 per square metre for premium species timber, with hybrid, bamboo and engineered timber sitting in between.
This guide sets out real per-square-metre rates for every main floor type, explains what moves the price up or down, and shows where each option makes sense for a Western Australian home. All rates below are for supply and installation unless stated, and prices exclude GST.
Flooring prices in Perth: 2026 rates per square metre
Here is the quick comparison. Each rate is a starting “from” price for supply and lay by Perth Flooring & Skirting; the exact figure depends on the product, the colour or species, the size and condition of your space, and for timber the install method (floating or direct-stick), all confirmed at the on-site measure.
| Floor type | Supplied & laid (ex GST) | Best for |
|---|---|---|
| Laminate (8 mm) | from $47 / m² | Budget-friendly, hard-wearing, huge colour range |
| Laminate (12 mm / water-resistant 8 mm) | from $53 / m² | A sturdier, quieter board or moisture resistance |
| Hybrid (7 mm luxury, waterproof) | from $56 / m² | Kitchens, laundries, wet areas; rigid and waterproof |
| Bamboo (floating) | from $78 / m² | A real timber-hard surface with a natural look |
| Bamboo (engineered) | from $88 / m² | Added stability over a concrete slab |
| Engineered timber | from $86 / m² | Real timber surface, stable over Perth slabs |
| Premium species engineered (Blackbutt, Spotted Gum) | from $115 / m² | Classic Australian hardwood character, engineered stability |
| Premium species engineered (Jarrah, Marri) | from $135 / m² | Iconic WA timbers in an engineered board |
| Timber installation only (you supply the boards) | from $32 / m² | Labour for solid, raw or engineered timber you supply |
You can price your own room in seconds with the online quote tool, or see the full current list on the prices page.
What decides the price of your floor?
- The material. This is the biggest lever by far, and it is why the table above spans from the $40s to well over $100 per m². Laminate is the value choice; premium Australian species timber is the top end.
- Supply and lay, or installation only. A supplied-and-laid rate covers both the boards and the labour. If you have already bought your timber, installation on its own starts from $32 per m².
- Your subfloor. Most Perth homes are built on a concrete slab. Floating floors (laminate, hybrid, floating bamboo) sit over an underlay, while timber is often glued straight down using the direct-stick method. The condition and flatness of the slab can affect preparation.
- The size of the job. Flooring is priced per square metre, so the total scales with your floor area. Larger continuous areas are generally more efficient to lay than many small rooms.
- Extras. Removing and disposing of old flooring, extra slab preparation, and matching new skirting or trims are separate from the per-m² supply-and-lay rate.
The floor types, and what each costs
Laminate flooring — from $47/m²
Laminate is the most cost-effective way to get a fresh, modern floor across a whole home. Modern boards are tough, scratch-resistant and come in a huge range of timber looks, with water-resistant options for busier areas. It is the natural starting point for anyone weighing up cost against appearance. See laminate flooring for the range.
Hybrid flooring — from $56/m²
Hybrid combines the best of laminate and vinyl into a rigid, waterproof board, which makes it a favourite for Perth kitchens, laundries and open-plan living. It handles spills and humidity without the swelling risk of cheaper products. More on hybrid flooring.
Bamboo flooring — from $78/m²
Bamboo gives you a genuinely hard, natural surface with a distinctive grain, available as a floating floor from $78/m² or as an engineered board from $88/m² for extra stability over a slab. It is a strong middle ground between laminate and solid timber. See bamboo flooring.
Engineered timber — from $86/m²
Engineered timber has a real timber wear layer over a stable core, so you get the look and feel of solid wood with much better resistance to Perth’s seasonal movement. It is ideal for direct-sticking over a concrete slab. More on engineered and timber flooring.
Premium species engineered timber — from $115/m²
For genuine hardwood character, premium Australian species come as an engineered board that pairs the look of the real timber with far better stability over a Perth slab. Blackbutt and Spotted Gum start from $115/m² supplied and laid, while the iconic WA timbers Jarrah and Marri start from $135/m². If you would rather supply your own timber, installation alone starts from $32/m². See timber flooring, or browse raw timber flooring if you are supplying your own boards.
What is specific to flooring in Perth?
A few Western Australian realities shape both the choice and the cost:
- Concrete slabs and direct-stick. The great majority of Perth homes sit on a concrete slab rather than a timber subfloor. Direct-sticking timber straight to the slab is the most popular method here, and it gives a solid, quiet floor when done properly. This is a genuine local specialty rather than a national default.
- Climate and moisture. Perth’s warm, dry summers and cooler, wetter winters mean seasonal movement matters. Engineered and hybrid products are more forgiving than solid timber in wet areas, which is why they are so popular in local kitchens and laundries.
- Local supply and install. Keeping the supply and the fitting with one Perth business means a single point of accountability and, usually, a sharper overall price than buying and installing separately.
What is not included in the per-m² price?
To keep your budget realistic, remember the supply-and-lay rate is for the floor itself. Allow separately for GST, for removing and disposing of any old flooring, for extra slab preparation if the surface needs levelling, and for new skirting boards to finish the room cleanly once the floor is down.
Getting an accurate flooring quote in Perth
The rates above are the right way to shape a budget, but the only way to a firm number is to price your actual space. Measure the area of each room in square metres, choose a floor type, and get it quoted. Perth Flooring & Skirting is a local, fully insured business based in Pearsall with public liability cover up to $5 million, and the same team that quotes your floor is the team that lays it.
Put your measurements into the online quote tool for a fast estimate, or browse the full rates on the prices page.
Flooring cost in Perth: frequently asked questions
How much does flooring cost per m² in Perth?
Supplied and laid, laminate starts from $47/m², hybrid from $56/m², bamboo from $78/m², engineered timber from $86/m², and premium species timber from $115–$135/m² (all ex GST).
What is the cheapest flooring option?
Laminate is the most budget-friendly choice at Perth Flooring & Skirting, from $47/m² supplied and laid, and modern laminate is hard-wearing with a wide colour range.
Do the prices include installation?
Yes. The per-m² rates are for supply and lay. If you have already bought your own timber, installation on its own starts from $32/m².
Which floor is best for a concrete slab?
Most Perth homes are on a slab. Floating floors (laminate, hybrid, floating bamboo) suit slabs well, and timber is commonly direct-stuck to the slab for a solid finish.
How do I get an exact price for my home?
Measure each room in square metres, choose a floor type, and use the online quote tool for a fast, no-obligation estimate.